Connect an external momentary-action key switch to any zone given this
designation. This zone will arm/disarm the partitions assigned to it.
Connect an external SPST latched (non-momentary) key switch as follows:
⬧ After arming one or more partitions using the key switch and then
disarming using the keypad, the related partitions will be disarmed. In
order to arm the partition using the key switch again, turn the key to
the disarm position and then to the arm position.
⬧ If a key switch latch is assigned to more than one partition and one of
the partitions is armed by using the keypad (the key switch stays in the
disarm position), then:
- When changing the position of the key switch to the arm position, all
the disarmed partitions, which belong to this key switch, will be
armed.
- When turning the key switch to the disarm position, all the partitions
will be disarmed.
To Next Page
Loading...
