Risco RW332M - Page 62

Page 56
Zones: Parameters
Parameter
Default
Range
Latch Key Switch Delay
Used to apply the Exit/Entry Delay 1 parameter to the latched key switch
zone.
Keybox
(Designed for the Danish market) A keybox is defined as a physical
container in which to place the house keys. The WiComm Pro keybox zone
behaves as follows:
⬧ Opening a key box zone (regardless of system arming status) sends a
message to the monitoring station and recorded in the event log
⬧ There will be no indication on the screen that this zone is open
⬧ Tampering with a keybox causes a tamper alarm
⬧ If this zone is open, then the system can be armed
Open Delay
Use this zone for a door when used with wireless 2-way slim keypads
defined as in bypass mode. This zone behaves as follows:
⬧ If the system is armed and the zone is opened without bypass code
approval, the zone acts as an instant zone
⬧ If the system is armed and the zone is opened during the Entry Bypass
timer (see page 34), it acts as an exit/entry zone
⬧ When the system is disarmed, this zone activates as an exit(open)
/entry zone
Sound
Bell+Buzzer
Contains parameters that enable you to program the sound produced when a system
zone triggers an alarm for the time defined under the Bell Time Out parameter.
Silent
Produces no sound.
Bell
Activates the wireless sirens (internal or external) and alarm from the main
panel assigned to the partitions of the zone.
Buzzer (main panel)
Activates the internal buzzer on the main panel.
Bell + Buzzer
Activates the wireless sirens and siren on the main panel simultaneously.