Risco RW332M - Page 68

Page 62
RWX78M Parameters (2 way Slim Contact detectors)
LED
On
On/Off
Defines the LED operation mode.
On: Detector's LED activated
Off: Detector's LED deactivated
Hold On
On
On/Off
Use this parameter to define the minimum period between alarm
transmissions.
ON: Only one alarm message is transmitted in any 2.5-minute time-period
OFF: Alarm detection is immediately transmitted.
RWX78S Detector Parameters (for 2 way Slim Shock detectors)
LED Enabled
Yes
Yes/No
Defines the LED operation mode.
Yes: Detector's LED activated
No: Detector's LED deactivated
Shock Sensitivity
TBD
0-100%
Defines the detector’s level of sensitivity.
RWX78SM Detector Parameters (for 2 way Slim Shock and Contact detectors)
Magnet
LED Enabled
Yes
Yes/No
Defines the LED operation mode.
Yes: Detector's LED activated
No: Detector's LED deactivated
Hold On
On
On/Off
Use this parameter to define the minimum period between alarm
transmissions.
ON: Only one alarm message is transmitted in any 2.5-minute time-period
OFF: Alarm detection is immediately transmitted.
Shock
Shock
Enabled
Enabled/Disabled
Defines whether to enable or disable shock detection
LED Enabled
Yes
Yes/No
Defines the LED operation mode.
Yes: Detector's LED activated
No: Detector's LED deactivated
Shock Sensitivity
TBD
0-100%