Roche URISYS 2400 - Page 165

URISYS 2400 Index
Test parameters - Wavelengths
Roche Diagnostics
Operator’s Manual · Version 1.0 G-9
Test parameters
– concentration ranges, F-5
– printout, B-28
– setting of, B-17
– wavelengths, A-4
Test strips, A-2, B-2, B-30
Toggle function, B-15
Touch screen
– basic screen composition, B-13
– main buttons, B-14
– window, B-15
Transceiver, xii
Tray, B-4, C-3, C-9
Trouble shooting
– alarm levels, E-3
– alarm log, E-4, E-8
– clearing alarms, E-8
– data alarms (flags), E-1
– FD write, E-8
– handling alarms, E-3
– instrument alarms, E-12
– printing cumulative alarm, E-7
– printing daily alarm, E-6
– switch the alarm buzzer on and off, E-4
– test strip empty alarm, C-18, E-14
TS cassette, see Cassette
TS transfer base
– cleaning, D-6
– setting up, B-8
Units
– arbitrary units, B-22
– selecting concentration units, B-24
Urinalysis, A-2
Urine analytes, A-2
Urine sample, see Samples
Urine test parameters, see Test parameters
Urine test strips, see Test strips
URISYS 2400 analyzer, A-2, B-3
URISYS 2400 cassette, see Cassette
Urobilinogen, concentration ranges, F-5
Used test strips, D-2
User interface screen, see Touch screen
Warning label, x
Warranty, ii, iii, D-15
Wash rack
– registering the wash rack, B-27
– using on the input line, D-4
Washing procedure
– detergent, D-4
– liquid handling system, D-4
Waste container, see Strip waste container
Waste liquid tank, see Liquid waste tank
Waste liquid, disposal of, D-6
Water filter, maintenance, D-3
Water supply tank
– liquid level detector, B-7
– setting up, B-7
Wavelengths, A-2, A-4
U
G
W
G