Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 117
Appendix A
Update Firmware
Chapter Objectives This chapter provides topics on how to update firmware in the terminal.
• Prepare for firmware update
• Update firmware using ControlFLASH
• Update firmware using a removable storage device
The firmware update runs an executable script on a removable storage device
such as a USB drive or a microSD card that copies a firmware image into the
nonvolatile memory of the terminal.
Prepare for Firmware
Update
Follow these steps before starting a firmware update.
1. Backup applications and library objects from the terminal.
IMPORTANT The PanelView Explorer feature is only supported on PanelView 800
terminals with firmware revision 2.020 or earlier. It is not supported
from firmware revision 3.011 onwards.
IMPORTANT From firmware revision 3.011 onwards, the terminal must not be in
Protected Mode when performing a firmware upgrade. For more
information, see Protected Mode
on page 97.
IMPORTANT When you perform a firmware update, your terminal password, VNC
settings, port settings, FTP server setting, and print settings are
cleared and reset to their default configuration.
The VNC feature is only supported on PanelView 800 terminals with
firmware revisions 4.011…7.011.
For more information, contact your local technical support at
rok.auto/phonesuppo
rt.
IMPORTANT Terminate the VNC connection before performing a firmware update as
it may interfere with the process.
The VNC feature is only supported on PanelView 800 terminals with
firmware revisions 4.011…7.011.
For more information, contact your local technical support at
rok.auto/phonesuppo
rt.
To Next Page
Loading...
Need help?
General
