Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 15
Chapter 1 Overview
Catalog Number
Configuration
These are the available PanelView 800 terminals.
WARNING: If you connect or disconnect the USB cable with power applied to this
module or any device on the USB network, an electrical arc can occur. This could
cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
ATTENTION: Removing the USB drive or microSD card, from the
PanelView 800 terminal, while a firmware update is in process, could corrupt
the firmware and make the terminal unusable. Take precautions to help
prevent the USB drive or microSD card from being accidentally disconnected.
Also, do not power off the terminal while a firmware update is in progress.
USB hubs can produce unexpected behaviors and as a result are not
recommended.
Cat. No. Operator Input Size Display Type
2711R-T4T Touch screen and function keys 4 in. Color TFT
2711R-T7T Touch screen 7 in. Color TFT
2711R-T10T Touch screen 10 in. Color TFT
To Next Page
Loading...
Need help?
General
