Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 43
Chapter 2 Configure the Terminal
You can perform the following actions under System Information:
• View System Information
• Change Daylight Savings Time and Timezone
View System Information
You can view system information about your terminal including information
about the firmware, boot code, logic board, battery status (if applicable),
terminal on time, and memory used.
Follow these steps to view system information from the terminal.
1. Press System Information.
The system information screen displays firmware revision, boot code
version, logic board version, terminal on time, display on time, and
battery status.
Change Daylight Savings Time and Timezone
Follow these steps to change the daylight savings time and timezone from the
terminal.
1. Press System Information.
2. Press Advanced.
3. Use the arrow keys to enable or disable daylight savings time.
4. Use the arrows keys to select the timezone you want, then press Set.
Transferring Applications Applications that are created for one PanelView 800 terminal can be used on
other PanelView 800 terminals. For example, you might create an application
for one terminal and then distribute the application to other terminals for
production. An application that is created for PanelView 800 terminals cannot
be used on older PanelView Component terminals.
Advanced
Back
Automatically adjust for daylight savings time:
Current TimeZone:
(GMT-08:00) Pacific Time (US & Canada)
Disable
Select TimeZone
English
(GMT-11:00) Midway Island, Samoa
(GMT-10:00) Hawaii
(GMT-09:00) Alaska
(GMT-08:00) Tijuana, Baja California
(GMT-08:00) Pacific Time (US & Canada)
(GMT-07:00) Mountain Time (US & Canada)
(GMT-07:00) Chihuahua, La Paz, Mazatian
(GMT-07:00) Arizona
(GMT-06:00) Central Time (US & Canada)
Set
To Next Page
Loading...
Need help?
General
