20 Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023
Chapter 2 Configure the Terminal
Follow these steps to change the terminal language from the terminal.
1. Go to the main configuration screen.
2. To select the language, use the up and down arrow keys.
The change takes effect immediately.
Change the Date and Time
You can adjust the current date and time for terminal operations. The time is
set in 24-hour format. If using PanelView Explorer, you can also set the
terminal to automatically adjust the time for daylight savings time.
Follow these steps to change the terminal date and time from the terminal.
1. Go to the main configuration screen.
2. Click the number next to what you want to change under the 'Date and
Time' section.
A numeric keypad is displayed.
3. Select the numbers that you want and press the Enter key.
Restart the Terminal
You can restart the terminal without having to disconnect and reapply power.
After a reset, the terminal performs series of startup tests and then either
enters configuration mode or runs the startup application.
Follow these steps to restart the terminal from the terminal.
1. Go to the main configuration screen.
2. Press Reset Terminal.
3. Press Yes to confirm.
Main
File Manager
System Information
Current Application
Config Language Date and Time
Day Hour
Reset Terminal
Goto
14 10
Month Minute
1 30
Year Second
2015 56
English
Português
Français
Italiano
Deutsch
Español
简体中文
Terminal Setting
7 8 9
4 5 6
1 2 3
0 -
Esc
14
To Next Page
Loading...
Need help?
General
