Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 93
Chapter 4 Secure the Terminal
To reset a password for any user, click the Password - Reset cell and the
Security - Reset Password dialog appears. You can enter a new password
without knowing the old password.
To rename a user, click the User cell to select it, and click again on the user
name, then type a new user name.
Assign Design Rights Design rights allow a user account to edit the application. To assign design
rights to a user account, select the checkbox under the DESIGN column for
that account.
When design rights are assigned, the next time the application is opened in
Connected Components Workbench software, a Security - Authentication
dialog appears to prompt the user to enter a user name and password.
Create Access Rights You can create up to 16 rights for an application. Rights are used to determine
the application screens that users can access at runtime. Users can only access
screens that have an access right if they have the same right that is assigned to
them.
You can create a right for each screen in the application and assign these rights
to users based on the screens you want them to access at runtime, or you can
create rights by job function. For example, you can assign maintenance rights
to users that need to access the maintenance screens at runtime.
IMPORTANT We recommend that you do NOT assign any rights to the Startup screen.
To Next Page
Loading...
Need help?
General
