Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 95
Chapter 4 Secure the Terminal
Assign Rights to a Screen You can secure any screen in an application. To secure a screen, you assign an
access right to the screen. Any user or group who holds this access right can
access the screen at runtime by entering a user name and password. All other
users are denied access to the screen.
Each screen is limited to one access right.
Follow these steps to assign a right to a screen of your application.
1. In the Properties panel of the screen, locate the Access Rights setting
under the Screen category.
2. Click the pull-down arrow and select the right that you want to assign
from the list.
Changing Terminal Settings
To prevent unauthorized changing of terminal settings at runtime, such as
network configuration or the startup application, assign an access right to
screens that contain the Goto Config button.
IMPORTANT You cannot secure a screen unless rights are defined and assigned to
users on the User Accounts screen in the Settings tab.
To Next Page
Loading...
Need help?
General
