Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 71
Chapter 3 DesignStation in Connected Components Workbench Software
The exported language list is stored in a new worksheet with the name
“Language List”. Each data column contains the text information for one
language.
Import a Language List
Only language text information is imported. Location information and Text ID
are not imported. If the Text ID is not in the current Language List, then the
language text information is not imported.
Follow these steps to import a language list into your PanelView 800 terminal.
1. Under Languages in the Settings tab, click Import Language List.
2. Select the file to import the language list from.
The Import Language List results are shown in the Output pane.
IMPORTANT Note the following:
• The import action is canceled if the selected file is not in the correct
format, the name of the worksheet is not “Language List”, or no
language information exists.
• If there is duplicate language information in another column, it is
ignored.
• If the column contains non-supported language data, it is ignored.
• If the language count exceeds the limit (10), the excess column data is
ignored.
• If the language text string length exceeds the limit (255 characters), the
text string is truncated.
IMPORTANT An error message appears if one of the following conditions is true:
• The file does not reside in the local computer.
• The file does not have the extension “.xlsx”.
• The file is being used by another application.
IMPORTANT Only language text information is imported. Location information and
Text ID are not imported. If the Text ID is not in the current Language
List, then the language text information is not imported.
Take note of the following:
• The import action is canceled if the selected file is not in the correct
format, the name of the worksheet is not “Language List”, or no
language information exists.
• If there is duplicate language information in another column, it is
ignored.
• If the column contains non-supported language data, it is ignored.
• If the language count exceeds the limit (10), the excess column data is
ignored.
• If the language text string length exceeds the limit (255 characters), the
text string is truncated.
You can import text information for a language that has not been set on the
terminal. Make sure that the column header contains a Language ID and it will be
imported to Languages on the terminal.
To Next Page
Loading...
Need help?
General
