114 Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023
Chapter 6 Troubleshoot the System
2. Press Yes or F1 to return to the out-of-box condition, or press No or F2 to
cancel.
If you choose to return to the out-of-box condition, the terminal resets.
On the subsequent boot, the file system is formatted and removes the
contents including applications, logs, recipes, user-installed fonts,
objects, and graphics. Most terminal configuration parameters are
returned to their default values.
Restoring the Terminal This function enables you to clear all contents of the terminal and reset certain
settings to their default value using the Restore button. This function is similar
to returning the terminal to the out-of-box configuration.
IMPORTANT Returning to the out-of-box condition does not change the current
firmware on your terminal. If you upgraded the firmware on your
terminal, the upgraded firmware revision remains unaffected. See
Firmware Installation Using Removable Storage Device
on page 123 for
details on what is included in a firmware update.
IMPORTANT If you have forgotten your terminal password or VNC password, you can
use this procedure to restore your terminal. Remember, it removes all
applications, logs, recipes, user-installed font files, objects, and
graphics.
The VNC feature is only supported on PanelView 800 terminals with
firmware revisions 4.011…7.011.
For more information, contact your local technical support at
rok.auto/phonesuppo
rt.
IMPORTANT
If you have forgotten your terminal password or VNC password, you
can use this procedure to restore your terminal. Remember, it
removes all applications, logs, recipes, user-installed font files,
objects, and graphics.
The VNC feature is only supported on PanelView 800 terminals with
firmware revisions 4.011…7.011.
For more information, contact your local technical support at
rok.auto/phonesuppo
rt.
Settings Cleared or Reset to Default When Using Restore or in
Out-of-Box Condition
Setting Restore Out-of-Box Condition
Applications Y Y
Terminal Startup Application Y Y
User-Installed Font Files Y Y
Screensaver Y Y
VNC Settings
(1)
YY
Port Settings Y Y
FTP Settings Y Y
Print Settings Y Y
Network Credentials Y Y
Terminal Password Y Y
DHCP Option N Y
IP Address N Y
Subnet Mask N Y
To Next Page
Loading...
Need help?
General
