Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 45
Chapter 3
DesignStation in Connected Components
Workbench Software
DesignStation PanelView 800 DesignStation is a component within the Connected
Components Workbench software that allows you to create applications for
PanelView 800 terminals. You can create applications in Connected
Components Workbench software without being connected to a terminal but
you can only run the application on a physical terminal. Applications that are
created with Connected Components Workbench software can be downloaded
to the terminal through Ethernet, or transferred using a USB drive or microSD
card.
Figure 1 - Connected Components Workbench Software
We strongly recommend that you validate the transferred application using
the terminal software before running the application. Non-validated
applications, when started on the terminal, display a reminder popup message
that the application is not validated. Applications that are designed for
CompactLogix 5370™ or CompactLogix 5380 controllers must be validated
before running on the terminal.
You can download the latest version of Connected Components Workbench
software at rok.auto/ccw
.
To Next Page
Loading...
Need help?
General
