44 Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023
Chapter 2 Configure the Terminal
Transferring an application is a two-step process.
• Export the application from the internal storage of the terminal to a USB
drive or microSD card.
• Import the application from a USB drive, or microSD card to the internal
storage of another terminal.
If the target terminal is another type and size than the source terminal, some
aspects of the application are converted and the remaining properties require
updates. If trying to run an application, you are warned that the application
was not created for the terminal, but you are given an option to continue or
cancel unless the differences make it impossible to run the application (for
example, an Ethernet application on a terminal without an Ethernet network
connection).
PanelView 800 applications are saved with a “.cha” file type.
To Next Page
Loading...
