Rockwell Automation Publication 2711R-UM001I-EN-E - February 2023 159
Appendix E PanelView Explorer
• Delete applications, images, screen saver files, font files, terminal user
file and recipes from terminal storage.
A file transfer operation requires you to choose a source location, file type, and
destination location.
• Source location – the location of the file you want to transfer. You can
transfer a file from Internal Storage of the terminal, USB Storage,
microSD Storage, or My Computer.
• Source File Type – the type of file you want to transfer. The types of files
you can transfer include PanelView 800 applications, screen saver
images, fonts, recipes, and the terminal security file.
• Destination location - The location where you want to transfer the
selected file. You can transfer a file to Internal Storage of the terminal,
USB Storage, microSD Storage, or My Computer.
Adding Font Files These fonts reside on the terminal in the firmware image.
•Arial
•Courier New
•Tahoma
• Asian font (Simsun – Simplified Chinese)
The Arial, Courier, Tahoma, and Simsun fonts cannot be altered. Additional
Windows CE licensed fonts can be added to the terminal. Windows CE
licensed fonts can be downloaded from the PanelView 800 technical support
website at rok.auto/pv800
. No other fonts are licensed for use on the terminal.
IMPORTANT Some actions may not be performed in PanelView Explorer but may be
done on the terminal, and vice versa. For example, you cannot transfer
applications using PanelView Explorer but you can do so from the
terminal.
IMPORTANT The PanelView Explorer feature is only supported on PanelView 800
terminals with firmware revision 2.020 or earlier. It is not supported
from firmware revision 3.011 onwards.
IMPORTANT
If transferring a file from or to USB or microSD storage, verify that the
USB drive or microSD card is inserted in the terminal before starting the
file transfer.
IMPORTANT
The USB drive or microSD card must be formatted in the FAT/FAT32 file
system for the terminal to read the contents of the external storage.
IMPORTANT
When transferring an application, if the target terminal is another type
and size then the source terminal, the application is converted when in
Test Run or Run mode. The application may require updates before
running properly.
To Next Page
Loading...
Need help?
General
