Rohde & Schwarz FSW26 - Page 465

Common Analysis and Display Functions
R&S
®
FSW
465User Manual 1173.9411.02 ─ 19
Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6...................................................... 465
Trace Mode.................................................................................................................465
Detector.......................................................................................................................466
Hold.............................................................................................................................466
Average Mode.............................................................................................................467
Average Count............................................................................................................ 467
Predefined Trace Settings - Quick Config...................................................................467
Trace 1/Trace 2/Trace 3/Trace 4 (Softkeys)............................................................... 468
Copy Trace..................................................................................................................468
Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the corresponding trace for configuration. The currently selected trace is high-
lighted orange.
For details see chapter 7.3.3.1, "How to Configure a Standard Trace", on page 477.
Remote command:
Selected via numeric suffix of:TRACe<1...6> commands
Trace Mode
Defines the update mode for subsequent traces.
For details see chapter 7.3.1.2, "Analyzing Several Traces - Trace Mode",
on page 455.
Trace Configuration