Stereo Modulation (Option R&S SML-B5) R&S®SML / R&S®SMV03
1090.3123.12 E-6 4.42
Sending a RDS dataset to the R&S SML / R&S SMV03
:STER:DIR "PI=0123"
:STER:DIR "PS=TEST1"
:STER:DIR "TP=0"
:STER:DIR "TA=0"
:STER:DIR "PTY=00"
:STER:DIR "DI=0"
:STER:DIR "MS=S"
:STER:DIR "STORE=1"
After downloading the commands of the above example and selecting RDS dataset 1 the following
information is indicated on the display.
RDS Data Set 1
Program Service Name TEST1
Program Identifikation 0123
Traffic Program Off
Trafic Announcement Off
Important: Only after sending the STORE command (see last line in the above example) the dataset
will be stored in the non-volatile memmory of the SMV03.
The TP (Traffic Programm) and TA (Traffic Announcement) settings can manually be modified at any
time as long as the dataset is displayed.
To Next Page
Loading...
