Rohde & Schwarz SML01 - List Editor; Fig. 3-3 Level - Ucor Menu

R&S®SML / R&S®SMV03 List Editor
1090.3123.12 E-6 3.7
List Editor
The R&S SML / R&S SMV03 offers the facility of generating lists for user-defined level correction (Ucor).
The lists consist of elements (pairs of values) which are defined by an index and at least one parameter
per index. Each list is assigned a separate name and selected by means of this name. Access to the lists is
made in the associated menus. How to generate and edit lists is explained in detail in this section by the
example of the user defined level correction Ucor (Level - UCor menu, see Fig. 3-3).
Menu selection: Level - UCor
Fig. 3-3 Level - UCor menu
The settings for State are not relevant for the general description of the list editor. They are described in
greater detail in chapter 4 in section "User Correction Ucor".
The Select List, Delete List and Edit List lines are always displayed. They are intended for the selection
and deletion of lists and for the calling of editing functions.
Select List
Opens a window in which a list out of 10 lists can be selected. In this line, the
currently active list is displayed (see section "Select List").
Delete List
Opens a window from which a list can be selected whose contents are to be
deleted (see section "Delete List").
Edit List
Selection of editing functions for list editing. When this item is selected, a pop-up
menu with the following editing functions opens (see section "Edit List"):
Insert Insertion of elements into a list
Fill Filling of a list with elements
Edit/View Editing of individual elements of a list
Delete Deletion of elements of a list
If the list is empty, only selection Insert is available.