Rohde & Schwarz SML01 - Select List; Delete List; Fig. 3-4 Select List Window; Fig. 3-5 Delete List Window

List Editor R&S®SML / R&S®SMV03
1090.3123.12 E-6 3.8
Select List
 Mark the desired list using the rotary knob (see Fig. 3-4).
 Press the [SELECT] key or the rotary knob.
The selected list is included in the instrument setup. The selection window is closed. The selected list
is displayed under Select List.
Selection: Select List
Fig. 3-4 Select List window
UCor0
The currently selected list, in this case Ucor0, is marked in the selection
window.
0100
The length of the list, in this case 100 elements, is indicated in the column
right of the list designation.
Delete List
 Mark the desired list using the rotary knob (see Fig. 3-5).
 Press the [SELECT] key or the rotary knob.
The following query will appear:
"Are you sure? Press SELECT to confirm BACK to cancel".
 Press the [SELECT] key or the rotary knob.
The contents of the list will be deleted. If the query is answered by pressing the [BACK] key, the
contents of the list will be retained. The selection window is automatically closed upon answering the
query.
Selection: Delete List
Fig. 3-5 Delete List window