Utilities R&S®SML / R&S®SMV03
1090.3123.12 E-6 4.60
Phase of the Output Signal
The menu Utilities - Phase offers access to the phase setting of the RF output signal with respect to a
reference signal of the same frequency. Activated FM, M, or stereo modulation will be switched off if
the phase setting will be switched on and vice versa.
Menu selection Utilities - Phase
Fig. 4-29 Menu Utilities – Phase
State
Switching on/off phase setting.
IEC/IEEE-bus command :SOUR:PHAS:STAT ON
Delta Phase
Setting value of the phase.
IEC/IEEE-bus command :SOUR:PHAS 30 DEG
Reset Delta Phase
Sets the display of the Delta Phase to 0 without the phase of the
output signal being influenced.
IEC/IEEE-bus command :SOUR:PHAS:REF
To Next Page
Loading...
