Rohde & Schwarz SML01 - System; Fig. 4-24 Utilities - System Menu; Fig. 4-25 Utilities - System - GPIB - Address Menu

Utilities R&S®SML / R&S®SMV03
1090.3123.12 E-6 4.56
System
Menu selection: Utilities – System
Fig. 4-24 Utilities - System menu
IEC/IEEE-Bus Address (System - GPIB)
Access to the remote-control address is offered by the Utilities - System - GPIB - Address submenu.
The setting range is 1 to 30. The address is factory-set to 28.
Menu selection: Utilities – System – GPIB – Address
Fig. 4-25 Utilities – System – GPIB – Address menu
GPIB-Address
Input value of IEC/IEEE-bus address.
IEC/IEEE-bus command :SYST:COMM:GPIB:ADDR 28