R&S®SML / R&S®SMV03 List Editor
1090.3123.12 E-6 3.9
Edit List
When Edit List is selected, a pop-up menu with the editing functions opens.
Insert editing function (see Fig. 3-6)
The Insert function inserts a desired number of elements with constant or linearly increasing/decreasing
values ahead of the element with the indicated start index. All elements already existing from the start
index are shifted so that they come at the end of the range of elements to be inserted.
Elements are inserted in a list according to the following procedure:
When Insert has been selected, the menu cursor is on the Insert At menu item.
Press the [SELECT] key or the rotary knob.
The menu cursor is on the value for At.
Vary the index value by means of the rotary knob or enter an index value using the numerical keys
and the [ENTER] key.
Press the [SELECT] key or the rotary knob.
The menu cursor is on the value for Range.
Vary the Range value by means of the rotary knob or enter a value using the numerical keys and the
[ENTER] key.
Press the [SELECT] key or the rotary knob.
The menu cursor is on the value for Start Frequency.
Vary the start value for the frequency by means of the rotary knob or enter a value using the
numerical keys and the [ENTER] key.
Press the [SELECT] key or the rotary knob.
The menu cursor is on the value for Increment Frequency.
Vary the value of the increment by means of the rotary knob or enter a value using the numerical keys
and the [ENTER] key.
Press the [SELECT] key or the rotary knob.
The menu cursor is on the value for Power.
Vary the start value for the power by means of the rotary knob or enter a value using the numerical
keys and the [ENTER] key.
Press the [SELECT] key or the rotary knob.
The menu cursor is on the value for Increment Power.
Vary the value of the increment by means of the rotary knob or enter a value using the numerical keys
and the [ENTER] key.
The cursor is on Execute. Press the [SELECT] key or the rotary knob to execute the insertion. The
menu cursor goes back to Edit List.
Upon pressing the [BACK] key, the editing window is exited without any change being made. The menu
cursor goes back to Edit List.
To Next Page
Loading...
