Rohde & Schwarz SML01 - Elements of the Rear Panel; Fig. 1-2 Rear Panel View

Rear Panel R&S®SML / R&S®SMV03
1090.3123.12 E-6 1.10
Elements of the Rear Panel
MOD
LF
10 MHz REF 10 MHz REF TRIGGER
RS 232
IEEE 488
625
SC PI
RF 50
LR
STEREO
F1 / F2 :
IEC 127 - T2.5 H / 250 V
AUTOMATIC POWER SELECTION
200 VA
200 ... 240 V 50 ... 60 Hz
50 ... 400 Hz100 ... 120 V
LR 114 196
C
®
US
OPTION INCL.
S/ P DIF
PULSE PULSE / VIDEO
I Q
1
2 5437
6
8
Fig. 1-2 Rear panel view
1
MOD
LF
RF 50

MOD Relocation of MOD input for external modulation
signals. Only with option R&S SML-B19.
LF Relocation of LF output for signals of internal LF
generator. Only with option R&S SML-B19.
RF 50 M Relocation of output for RF signals. Only with
option R&S SML-B19.
2
10 MHz REF
PULSE
PULSE
VIDEO
10 MHz REF
10 MHz
REF Output of the internal 10-MHz-reference signal
with reference internal.
Input for external reference frequency 10 MHz with
reference external.
PULSE Input for triggering the pulse generator or for direct
control of the pulse modulation. Only with option
R&S SML-B3.
PULSE/
VIDEO Output of pulse generator or video output (only
with option R&S SML-B3).
 Cf. Chapter 4, Section "Pulse Generator".
3
T
R
I
G
G
E
R
TRIGGER Input to trigger the sweep.
 Cf. Chapter 4, Sections "Sweep Inputs".
4
RS-232 RS-232-C interface
used for software update and remote control. The
pin assignment corresponds to the pin assignment of
a PC.
 Cf. Chapter 5, Section "Interface RS-232-C".