R&S®SML / R&S®SMV03 Phase Modulation
1090.3123.12 4.13 E-6
Phase Modulation
Settings for phase modulation can be made in the Modulation – M menu.
Menu selection: Modulation – M
Fig. 4-11 Modulation - M menu (preset setting)
M Deviation
Input value for deviation.
IEC/IEEE-bus command :SOUR:PM 1 RAD
M Source
Switching on/off PM and selection of modulation source.
IEC/IEEE-bus commands :SOUR:PM:SOUR EXT; STAT ON
Ext Coupling
Selection of AC or DC coupling for external input MOD.
IEC/IEEE-bus command :SOUR:PM:EXT:COUP AC
LFGen Freq
Selection of frequency of LF generator.
IEC/IEEE-bus command :SOUR:PM:INT:FREQ 1kHz
M Bandwidth
Setting of bandwidth. Settings Standard and Wide are available.
IEC/IEEE-bus command :SOUR:PM:BAND WIDE
To Next Page
Loading...
