Rohde & Schwarz SML01 - Setting the Sweep Blank Time

Utilities R&S®SML / R&S®SMV03
1090.3123.12 E-6 4.68
Setting the Sweep Blank Time
Settings for the Sweep Blank Time can be made in the Utilities – AuxIO menu.
Menu selection: Utilities – AuxIO
Fig. 4-37 Utilities – AuxIO menu
Sweep Blank Time
Selection of blank duration
Norm The blank duration is set to the shortest possible time.
Long The blank duration is set to approx. 500 ms.
IEC/IEEE-bus command :SOUR2:SWE:BTIM NORM