R&S®SML / R&S®SMV03 Utilities
1090.3123.12 E-6 4.67
Assigning Modulations to the [MOD ON/OFF] Key (ModKey)
Modulation types can be switched on/off in the modulation menus and with the [MOD ON/OFF] key.
It can be defined in the Utilities - ModKey menu for which modulation types the [MOD ON/OFF] key is to
be effective. The key is effective either for all types of modulation or only for a selected modulation.
Function of [MOD ON/OFF] key if effective for only one type of modulation:
The status (on/off) of the selected modulation type will change at each keypress.
Function of [MOD ON/OFF] key if effective for all types of modulation (All):
If at least one type of modulation is switched on, pressing of the [MOD ON/OFF] key will switch off the
modulation(s). The modulation types previously active are stored.
If switch-on is made with the [MOD ON/OFF] key, the modulation sources set in the modulation menus
are used.
The modulation types to be switched on or off with the [MOD ON/OFF] key can be selected in the
Utilities - ModKey menu.
Menu selection: Utilities - ModKey
Fig. 4-36 Utilities - ModKey menu (preset setting)
Modulation
Selection of modulation type(s) for which the [MOD ON/OFF] key is to be
effective.
Note: Preset switches off all modulations, sets this parameter to All and
stores AM 30% as default setting.
To Next Page
Loading...
