R&S®SML / R&S®SMV03 PULSE/VIDEO Output
1090.3123.12 E-6 4.47
PULSE/VIDEO Output
The pulse generator output or video output is only available with Option R&S SML-B3, pulse generator,
cf. Section "Pulse Generator".
Menu selection: Pulse Output
Fig. 4-18 Pulse Output menu
Pulse Output Source
Switching on/off pulse source. Off, PulseGen or Video can be selected.
IEC/IEEE bus command :OUTP3:SOUR OFF
Pulse Output Polarity
Selection of polarity of pulse signal.
Normal or Inverse can be selected.
IEC/IEEE bus command :OUTP3:POL:PULS NORM
Pulse Period
Input value of pulse period.
IEC/IEEE-bus command :SOUR:PULS:PER 10us
Pulse Width
Input value of pulse width.
IEC/IEEE-bus command :SOUR:PULS:WIDT 1us
Pulse Delay
Input value of single pulse delay. This value is indicated only if Double Pulse
State is set to Off.
IEC/IEEE-bus command :SOUR:PULS:DEL 1us
Double Pulse Delay
Delay between the two pulses of a double pulse. This value is indicated only if
Double Pulse State is set to On.
IEC/IEEE-bus command :SOUR:PULS:DOUB:DEL 1us
Double Pulse State
Switching on/off double pulse.
On Double pulse is switched on
Off Single pulse
IEC/IEEE-bus command :SOUR:PULS:DOUB OFF
To Next Page
Loading...
