R&S®SML / R&S®SMV03 DIAGnostic
1090.3123.12 E-6 6.9
:DIAGnostic:INFO:SDATe?
The c
ommand queries the date of software creation. The response is returned in the form year,
month, day.
Example: :DIAG:INFO:SDAT? Response: 1999, 12, 19
:DIAGnostic:[:MEASure]
The commands which trigger a measurement in the instrument and return the measured value
are under this node.
:DIAGnostic[:MEASure]:POINt?
The command triggers a measurement at a measuring point and returns the voltage measured.
The measuring point is specified by a numeric suffix (cf. service manual).
Example: :DIAG:MEAS:POIN? 2 Response: 11.56
To Next Page
Loading...
