SOURce:DM R&S®SML / R&S®SMV03
1090.3123.12 E-6 6.18
[:SOURce]:DM:IQSwap[:STATe] ON |
OFF
The command interchanges the I and the Q channels in position on.
Example: :SOUR:DM:IQS ON *RST value is OFF
[:SOURce]:DM:LEAKage:[MAGNitude] 0 to 50.0 PCT
The command adjusts the residual carrier amplitude for vector modulation.
Example: :SOUR:DM:LEAK:MAGN 5 PCT *RST value is 0
[:SOURce]:DM:QUADrature:ANGLe
The command changes the quadrature offset for vector modulation.
Example: :SOUR:DM:QUAD:ANGL 4 DEG *RST value is 0
To Next Page
Loading...
