Rohde & Schwarz SML01 - Page 234

List of Commands R&S®SML / R&S®SMV03
1090.3123.12 E-6 6.56
Command Parameter SCPI-Info Page
:SOURce2:SWEep[:FREQuency]:MODE AUTO | MANual | STEP not-SCPI 6.43
:SOURce2:SWEep[:FREQuency]:RUNNing? not-SCPI 6.43
:SOURce2:SWEep[:FREQuency]:SPACing LINear | LOGarithmic not-SCPI 6.44
:SOURce2:SWEep[:FREQuency]:STEP[:LINear] 0 to 1 MHz not-SCPI 6.44
:SOURce2:SWEep[:FREQuency]:STEP:LOGarithmic 0.01 to 100PCT not-SCPI 6.44
:STATus:PRESet 6.45
:STATus:QUEue [:NEXT]? 6.45
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess 1 to 30 6.46
:SYSTem:COMMunicate:SERial:BAUD 1200| 2400| 4800| 9600| 19200|
38400| 57600| 115200
6.47
:SYSTem:COMMunicate:SERial:BITS 7 | 8 6.47
:SYSTem:COMMunicate:SERial:SBITs 1 | 2 6.47
:SYSTem:COMMunicate:SERial:CONTrol:RTS ON | IBFull | RFR 6.47
:SYSTem:COMMunicate:SERial:PACE XON | NONE 6.47
:SYSTem:COMMunicate:SERial:PARity ODD | EVEN | NONE 6.47
:SYSTem:DISPlay:UPDate[:STATe] ON | OFF 6.47
:SYSTem:ERRor? 6.47
:SYSTem:PRESet 6.48
:SYSTem:PROTect[1|2|3|4][:STATe] ON | OFF, Password not-SCPI 6.48
:SYSTem:SECurity[:STATe] ON | OFF 6.48
:SYSTem:SERRor? not-SCPI 6.48
:SYSTem:VERSion? 6.48
:TEST:DIRect Address, subaddress, hex data string 6.49
:TEST:ASSy Module, subaddress, hex data string 6.49
:TEST:RAM? 6.49
:TEST:ROM? 6.49
:TEST:BATTery? 6.49
:TRIGger1|2[:SWEep][:IMMediate] not-SCPI 6.50
:TRIGger1|2[:SWEep]:SOURce AUTO | SINGle | EXTernal not-SCPI 6.51
:TRIGger:PULSe:EGATed:POLarity NORMal | INVerted not-SCPI 6.51
:TRIGger:PULSe:SOURce AUTO | EXTernal | EGATed not-SCPI 6.51
:TRIGger:PULSe:SLOPe POSitive | NEGative not-SCPI 6.51
:TRIGger:PULSe][:IMMediate] not-SCPI 6.51
:UNIT:POWer DBM | VOLT | DBUV | V not-SCPI 6.52