Stereo Modulation (Option R&S SML-B5) R&S®SML / R&S®SMV03
1090.3123.12 E-6 4.20
Program Service Name
Ind
ication of the program service name of the selected RDS data set
(hexadecimal value OOOO bisFFFF).
Each RDS data set has its own program service name. It can only be
modified over the IEC/IEEC bus or the RS-232 interface (see section "RDS
commands").
Program Idendification
Indication of the program service name of the selected RDS data set
(hexadecimal value OOOO bisFFFF). .
Each RDS data set has its own program identification. It can only be
modified over the IEC/IEEC bus or the RS-232 interface (see section "RDS
commands").
Traffic Program
Switching on/off traffic programm.
On Traffic program on
Off Traffic program off
IEC-Bus-Befehl :SOUR:STER:RDS:TRAF:PROG ON
Traffic Announcement
Switching on/off Traffic announcement
On Traffic announcement on
Off Traffic announcement off
IEC-Bus-Befehl :SOUR:STER:RDS:TRAF:ANN ON
RDS commands
The option R&S SML-B5 supports all important RDS commands in accordance with IEC 62106:1999
The complete RDS command set of the option can be operated over the IEC/IEEE bus or the the RS-
232 interface. Some basic RDS functions can also be found in the Modulation - Stereo menu and can
manually be operated, too.
RDS settings via remote control: :SOUR:STER:DIR "command string"
RDS queries via remote control: :SOUR:STER:DIR? ["command string"]
To Next Page
Loading...
