Rohde & Schwarz SMW-K144 - Page 116

5G New Radio Configuration and Settings
R&S
®
SMW-K144
116User Manual 1178.8013.02 ─ 06
DCI field Remote command: Remark
Antenna Ports [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:ANTPorts
on page 243
Transmission Configuration
Indication
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TCI on page 247
SRS Request [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:SRSRequest
on page 243
CBG Transmission Information
(CBGTI)
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:CBGTi on page 247
CBG Flushing Out Information
(CBGFI)
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:CBGFi on page 247
DMRS Sequence Initialization [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:DMSQinit
on page 244
Custom ← DCI Content Configuration
This is a DCI without predefined DCI fields. The DCI content is user-definable.
Channel Coding ← Custom ← DCI Content Configuration
Enables channel coding.
If PDSCH Scheduling = "Auto/DCI", the "Channel Coding" = "On".
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:STATe on page 247
Data Source ← Custom ← DCI Content Configuration
Selects the data source for the custom DCI.
The following standard data sources are available:
●
"All 0, All 1"
An internally generated sequence containing 0 data or 1 data.
CORESET Settings