Rohde & Schwarz SMW-K144 - Page 246

Remote-Control Commands
R&S
®
SMW-K144
246User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:SMINd <ShortMsgInd>
Sets the DCI field short message indicator.
Parameters:
<ShortMsgInd> integer
Range: 0 to 3
*RST: 0
Example: See Example "Configuring the CORESET settings"
on page 157.
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:BWINd <BWPInd>
Sets the DCI field BWP indicator.
Parameters:
<BWPInd> integer
Range: 0 to 3
*RST: 0
Manual operation: See "DCI Format 1_1" on page 113
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:PRBBundling <PRBBundling>
Sets the DCI field PRB bundling size indicator.
Parameters:
<PRBBundling> 0 | 1 | OFF | ON
*RST: 0
Manual operation: See "DCI Format 1_1" on page 113
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:RMINd <RMInd>
Sets the DCI field rate matching indicator.
Parameters:
<RMInd> integer
Range: 0 to 3
*RST: 0
Manual operation: See "DCI Format 1_1" on page 113
CORESET Commands