EasyManua.ls Logo

Rohde & Schwarz SMW-K144 - Page 64

Rohde & Schwarz SMW-K144
285 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5G New Radio Configuration and Settings
R&S
®
SMW-K144
64User Manual 1178.8013.02 ─ 06
Resources
Sets the number of periodicCSI-RS resources.
There is one table row per resource.
See "Periodic/aperiodic ZP CSI-RS resource table" on page 64.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:DL:BWP<dir0>:
CSIRs:ZP:SET<gr0>:NRESources on page 196
Periodic/aperiodic ZP CSI-RS resource table
Each periodicZP CSI-RS is configured individually; there is one table row per resource,
where the number of rows is defined by the parameter Resources.
Periodicity ← Periodic/aperiodic ZP CSI-RS resource table
For periodic ZP CSI-RS, sets the periodicity T
CSI-RS
(in slots) transmitted by the higher-
layer parameter CSI-ResourcePeriodicityAndOffset.
Thus, this parameter defines how often the CSI-Rs is transmitted.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:DL:BWP<dir0>:
CSIRs:ZP:SET<gr0>:RES<user0>:PER on page 197
Offset ← Periodic/aperiodic ZP CSI-RS resource table
For periodic ZP CSI-RS, sets the slot offset T
offset
transmitted by the higher-layer
parameter CSI-ResourcePeriodicityAndOffset.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:DL:BWP<dir0>:
CSIRs:ZP:SET<gr0>:RES<user0>:OFFSet on page 197
Row ← Periodic/aperiodic ZP CSI-RS resource table
The CSI-RS location in a slot is defined according to TS 38.211 as a function of the
number of ports X (Ports), the Density and the CDM-Type.
The possible combinations are listen in a table and the parameter "Row" indicates one
of the combinations. It is not the consequent table row number in the CSI-RS resource
table. The latter is defined with the suffix RES<user0> in the remote control command.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:DL:BWP<dir0>:
CSIRs:ZP:SET<gr0>:RES<user0>:ROW on page 197
Ports ← Periodic/aperiodic ZP CSI-RS resource table
Sets the number of ports X that is given by the higher-layer parameter nrofPorts.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:DL:BWP<dir0>:
CSIRs:ZP:SET<gr0>:RES<user0>:PORTs? on page 198
Density ← Periodic/aperiodic ZP CSI-RS resource table
Sets the value ρ that is the higher-layer parameter density in the
CSI-RS-ResourceMapping or the CSI-RS-CellMobility messages.
Users/BWPs Settings

Table of Contents

Related product manuals