Reference Manual
00809-0100-4026, Rev FA
July 2009
7-23
Rosemount 5400 Series
Warnings Table 7-4 is a list of diagnostic messages that may be displayed on the
Integral Display, on the 275/375 Handheld Communicator, or in the
Rosemount Radar Master (RRM) program. Warnings are less serious than
errors, and in most cases, do not result in Analog Output alarms.
Warnings are indicated in RRM in the Diagnostics window.
Table 7-4. Warning messages.
Message Description Action
RAM warning
See Diagnostics (RRM: Tools > Diagnostics) for further information on a
warning message.
See also “Diagnostics” on page 7-17.
FPROM warning
Hreg warning
MWM warning
LCD warning
Modem warning
Analog out warning
Internal temperature warning
Other hardware warning
Measurement warning
Config warning
SW warning
To Next Page
Loading...
