Reference Manual
00809-0100-4026, Rev FA
July 2009
Rosemount 5400 Series
B-2
EU CONFORMITY The EC declaration of conformity for all applicable European directives for this
product can be found on the Emerson Process Management website at
www.emersonprocess.com/Rosemount. A hard copy may be obtained by
contacting our local sales representative.
High voltage that may be present on leads could cause electrical shock:
Avoid contact with leads and terminals.
Make sure the main power to the Radar Transmitter is off and the lines to any other
external power source are disconnected or not powered while wiring
the gauge.
Antennas with non-conducting surfaces (e.g. Rod Antenna and All PTFE antenna) may
generate an ignition-capable level of electrostatic charge under certain extreme
conditions. Therefore, when the antenna is used in a potentially explosive atmoshpere,
appropriate measures must be taken to prevent electrostatic discharge.
To Next Page
Loading...
