Reference Manual
00809-0100-4026, Rev FA
July 2009
Rosemount 5400 Series
5-24
BASIC CONFIGURATION
USING AMS SUITE
The Rosemount 5400 Series transmitter can be configured using the AMS
Suite software:
1. Start the AMS Device Manager making sure
the transmitter is connected. The transmitter
is displayed in the Device Connection View
window (pictures correspond to AMS
version 9.0).
2. In the Device Connection View, right click the
transmitter icon.
3. Choose the Configure/Setup option.
4. Choose the Basic Setup option.
5. Configure the transmitter by selecting the
appropriate tab. For information on the
various configuration parameters, see “Basic
Configuration Parameters” on page 5-3 .
Configure/Setup
To Next Page
Loading...
