Reference Manual
00809-0100-4026, Rev FA
July 2009
Rosemount 5400 Series
1-4
Appendix B: Product Certifications
• Examples of labels
• European ATEX Directive information
• FM approvals
• CSA approvals
• IECEx approvals
• TIIS approval
• NEPSI approvals
• Approval drawings
Appendix C: Advanced Configuration
• Advanced Tank Geometry
• Advanced transmitter settings
• Advanced functions in RRM
SERVICE SUPPORT To expedite the return process outside of the United States, contact the
nearest Emerson Process Management representative.
Within the United States, call the Emerson Process Management Instrument
and Valves Response Center using the 1-800-654-RSMT (7768) toll-free
number. This center, available 24 hours a day, will assist you with any needed
information or materials.
The center will ask for product model and serial numbers, and will provide a
Return Material Authorization (RMA) number. The center will also ask for the
process material to which the product was last exposed.
Emerson Process Management Instrument and Valves Response Center
representatives will explain the additional information and procedures
necessary to return goods exposed to hazardous substance can avoid injury if
they are informed of and understand the hazard. If the product being returned
was exposed to a hazardous substance as defined by Occupational Safety
and Health Administration (OSHA), a copy of the required Material Safety
Data Sheet (MSDS) for each hazardous substance identified must be
included with the returned goods.
PRODUCT
RECYCLING/DISPOSAL
Recycling of equipment and packaging should be taken into consideration
and disposed of in accordance with local and national legislation/regulations.
To Next Page
Loading...
