Rosemount 5402 - Page 130

Reference Manual
00809-0100-4026, Rev FA
July 2009
Rosemount 5400 Series
A-10
Standard Flanges
Cone and Rod Antennas (model code: 2S-8S and 1R-4R)
Cone Antennas with Wetted Flange Plate (model code: 2H-8H, 2M-8M, and 2N-8N)
Process Seal Antennas
Designation
Mating
Standard
Face Style
(1)
Face Surface
Finish
Material
ANSI ASME B16.5 0.06 in. Raised Face R
a
= 125-250 µin. 316 / 316L
EN (DIN) EN 1092-1 2 mm Raised Face (Type B1) R
a
= 3.2-12.5 µm. EN 1.4404
JIS JIS B2220 2 mm Raised Face R
a
= 3.2-6.3 µm EN 1.4404
(1) Face gasket surface is serrated per mating standard.
Designation
Mating
Standard
Face Style
(1)
Face Surface
Finish
Material
ANSI ASME B16.5 0.06 in. Raised Face R
a
= 125-250 µin. 316 / 316L
EN (DIN) EN 1092-1 Flat Face (Type A) R
a
= 3.2-12.5 µm. EN 1.4404
JIS JIS B2220 2 mm Raised Face R
a
= 3.2-6.3 µm EN 1.4404
(1) Face gasket surface is serrated per mating standard.
Designation Standard Style Material
ANSI ASME B16.5 Slip-on 316 / 316L
EN (DIN) EN 1092-1 Slip-on (Type 01) EN 1.4404
JIS JIS B2220 Slip-on plate (SOP) EN 1.4404