RS PRO IIT-2000 - Page 117

IIT-2000/2010/5000/5010 Instruction Manual/English
05/08/2015 Version No. 001 115
5. Use the scroll wheel to select a parameter for the
chosen menu item.
Pass Sound
Fail Sound
ON (000.2s~999.9s), OFF
ON (000.2s~999.9s), OFF
6. Press EDIT/SAVE to save the settings and exit to
the VIEW status.
EDIT/SAVE
Note
When in automatic tests, the Pass Sound and Fail Sound
settings only apply to the overall PASS/FAIL of the overall
automatic test , not each test step that make up the automatic
tests.
Note
The ESC key can be pressed at any time to cancel and exit
back to VIEW status.
Interface Settings
Description
The interface settings choose the remote interface
configuration. USB, RS232 and GPIB (optional) can be
selected.
Steps
1. Ensure the tester is in VIEW status. Save the
current test if necessary.
Page 71