IIT-2000/2010/5000/5010 Instruction Manual/English
192 05/08/2015 Version No. 001
Remote Commands
*RMTOFF .............................................................................................................. 192
This command can be used to terminate a remote session. When
this command is used “RMT” will no longer be displayed on the
front panel, indicating that remote mode has been terminated.
Special Functions
Inter Lock Key Open ............................................................................................. 192
This special function is not a command. When in remote mode,
the IIT-20X0/50X0 will send the message, “Inter Lock Key
Open” if a test is started with INTERLOCK set to ON, but the
To Next Page
Loading...
