RS PRO IIT-2000 - Page 82

IIT-2000/2010/5000/5010 Instruction Manual/English
80 05/08/2015 Version No. 001
FAIL Judgment
1. When the test is judged as FAIL, FAIL will be
displayed, the buzzer will sound and the FAIL
indicator will be lit red.
As soon as a test is judged FAIL, power is cut from
the terminals.
FAIL
I R G B A CW D C W
F R E Q = 0 H z 6
0 100
k V
IAF
MT I E = 0 0 1 . 0 SR
0 0 m AER F =# 0 .0
1 . 0 0 m AIH ES = 0T
0 0 . 1 S0A M P =R
2M A UN 0 0_2M A N U = * * * - 0 0
L
m A
01 37
2. The FAIL judgment will be held on the display
until the STOP button is pressed. Pressing the
STOP button twice will return the tester to the
READY status.
STOP
3. The READY indicator will be lit blue in the
READY status.
READY
I R G B
m A
A CW D CW
E
F R E Q = 0 H z 6
0 100
k V
AER
MT I E = 0 0 1 . 0 SR
0 0 m AER F =# 0 .0
1 . 0 0 m AIH ES = 0T
0 0 . 1 S0A M P =R
D
MM A UN N A_2M A N U = * * * - 0 0
READY status
Y
Note
The buzzer will only sound if Fail Sound is set to ON. See
page 113 for details.