Configuration Guide Configuring PoE Configuration
Indicates the device ID, which identifies the sequence number of the system among a
stacked or VSU system.
Indicates the power management mode:
auto: auto mode
energy-saving: energy-saving mode
static: static mode
Indicates the maximum power that the system supports.
PSE total power consumption
Indicates the current power consumption of the system.
Indicates the available power of the system, which varies according to different power
management modes.
Indicates the total remaining power of the system.
Indicates the peak power of the system, which is the current maximum power of the
software system.
Indicates the average power of the PSE switch within the sampling period since the
device starts supplying power.
Indicates the number of ports to which the system is currently supplying power.
Indicates the disconnection detection mode of the system.
Indicates the reserved power of the system in %.
To Next Page
Loading...
