Configuration Guide Device Management Configuration
Example: Set the working mode of a fan to the force enable mode.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# fan force enable
Use the following examples to configure the working mode of the fan on the specified device.
Enters global configuration mode.
Ruijie(config)# fan force enable | disable | auto device
int
Sets the working mode of the specified fan to force
enable, force disable or restores to the default auto
mode.
Example: Set the working mode of a fan on Device 1 to the force enable mode.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# fan force enable device 1
Monitoring and Maintenance
Displaying Fans
Displays the working state, mode, and rotation speed of a
fan.
Example: Display the working mode of a fan.
Ruijie#show fans
Device Fan State Mode Speed(rpm)
------ ---- ------ --------------------- ----------
1 1 Normal Disable N/A
Displaying Online Assets
Ruijie#show version slots
Displays online asset information..
Example: Display online asset information. Ruijie#show version slots
Dev Slot Port Max Ports Configured Module Online Module User Status Software Status Serial
Number
--- ---- ---- --------- ----------------- ----------------- ------------ --------------- --------------
1 0 28 28 N/A RG-S2928GP N/A ok
79499486486486
To Next Page
Loading...
