Configuration Guide MAC Address Configuration
Viewing the IP Address and MAC Address Binding Table
To show the IP address and MAC address binding table, use the show
address-bind command in the privileged mode:
The following example shows how to view the IP address and MAC address
binding table :
Ruijie#show address-bind
Total Bind Addresses in System : 1
IP Address Binding MAC Addr
--------------- ----------------
192.168.5.1 00d0.f800.0001
Configuration Examples
Network Topology
As Figure-14 shows, the database server connects to the switch through the
interface GigabitEthernet 0/1, the web server connects to the switch through the
interface GigabitEthernet 0/2, and the server administrator connects to the
switch through the interface GigabitEthernet 0/3. Other users access the web
server through the interface GigabitEthernet 0/10. All data are forwarded in
VLAN 1.
The static MAC address configuration enables the data exchanged between the
web server and the database server, the administrator and the server to be
forwarded in the unicast form, preventing these data from being forwarded in
the broadcast form in the user network and ensuring the security of the
information exchanged between the web server and the database server, the
administrator and the server .
To Next Page
Loading...
