Ruijie RG-S2900G-E Series - Page 214

Configuration Guide Private VLAN Configuration
Configuration Steps
# Create Primary VLAN 99, Community VLAN 100, Isolated VLAN 101 and associate
the Primary VLAN and Secondary VLANs.
Ruijie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#vlan 100
Ruijie(config-vlan)#private-vlan community
Ruijie(config-vlan)#exit
Ruijie(config)#vlan 101
Ruijie(config-vlan)#private-vlan isolated
Ruijie(config-vlan)#exit
Ruijie(config)#vlan 99
Ruijie(config-vlan)#private-vlan primary
Ruijie(config-vlan)#private-vlan association 100,101
Ruijie(config-vlan)#exit
＃ Set interface gigabitEthernet 0/1, 0/2 in Community VLAN 100, interface
gigabitEthernet 0/3 in Isolated VLAN 101, interface gigabitEthernet 0/4 as
Promiscuous Port.
Ruijie(config)#interface gigabitEthernet 0/1
Ruijie(config-if)#switchport mode private-vlan host
Ruijie(config-if)#switchport private-vlan host-association 99 100
Ruijie(config-if)#exit
Ruijie(config)#interface gigabitEthernet 0/2
Ruijie(config-if)#switchport mode private-vlan host
Ruijie(config-if)#switchport private-vlan host-association 99 100
Ruijie(config-if)#exit
Ruijie(config)#interface gigabitEthernet 0/3
Ruijie(config-if)#switchport mode private-vlan host
Ruijie(config-if)#switchport private-vlan host-association 99 101
Ruijie(config-if)#exit
Ruijie(config)#interface gigabitEthernet 0/4