Ruijie RG-S2900G-E Series - Page 434

Configuration Guide MLD Snooping Configuration
Ruijie(config)# ipv6 mld snooping
ivgl
Enable the MLD Snooping and configure
the IVGL mode. By default, the MLD
Snooping is disabled.
Ruijie(config)# exit
Return to the privilege mode.
Ruijie# show ipv6 mld snooping
Verify the configurations.
The following example shows how to enable the MLD Snooping and configure the
IVGL mode:
Ruijie# configure terminal
Ruijie(config)# ipv6 mld snooping ivgl
Ruijie(config)# exit
Ruijie# show ipv6 mld snooping
MLD-snooping mode :IVGL
SVGL VLAN-ID :1
SVGL profile number :0
Source check port :Disable
Query Max Response Time :10 (Seconds)
Disabling Global MLD Snooping
To disable the MLD Snooping function, run the following commands in the
global configuration mode:
Command
Function
Ruijie(config)# no ipv6 mld snooping
Disable the MLD Snooping function. By
default, the MLD Snooping is disabled.
Ruijie(config)# exit
Return to the privilege mode.
Ruijie# show ipv6 mld snooping
Verify the configurations.
The following example shows how to disable the MLD Snooping function:
Ruijie# configure terminal
Ruijie(config)# no ipv6 mld snooping
Ruijie(config)# exit
Ruijie# show ipv6 mld snooping