Ruijie RG-S2900G-E Series - Page 435

Configuration Guide MLD Snooping Configuration
MLD-snooping mode :DISABLE
SVGL VLAN-ID :1
SVGL profile number :0
Source check port :Disable
Query Max Response Time :10 (Seconds)
Product
support
As for Version 10.4, all products support this configuration.
Disabling VLAN-based MLD Snooping
To disable the VLAN-based MLD Snooping function, run the following
commands in the vlan configuration mode:
Command
Function
Ruijie(config-vlan)# no ipv6 mld
snooping
Disable the VLAN-based MLD Snooping
function. By default, with the global MLD
Snooping enabled, the MLD Snooping
function in all VLANs are enabled.
Ruijie(config-vlan)# end
Return to the privilege mode.
Ruijie# show ipv6 mld snooping
Verify the configurations.
The following example shows how to disable the MLD Snooping in vlan 2:
Ruijie# configure terminal
Ruijie(config)# vlan 2
Ruijie(config-vlan)# no ipv6 mld snooping
Ruijie(config-vlan)# end
Ruijie# show ipv6 mld snooping
MLD-snooping mode :IVGL
SVGL VLAN-ID :1
SVGL profile number :0
Source check port :Disable
Query Max Response Time :10 (Seconds)
DISABLE VLAN :2