Configuration Guide GSN Configuration
Enter the global configuration mode.
Enter the interface configuration mode.
[no] security address-bind enable
Set the security address-bind policy on the
interface.
This function takes effect only when the global GSN is enabled and the port is
the authentication port. Besides, 802.1x IP authorization function shall be
disabled.
Viewing GSN Configuration
show smp-server
In the privileged mode, show the smp server information by using the following
commands:
Show the smp server information.
For example:
Ruijie#show smp-server
SMP-Server IP:192.168.217.220
showing security event interval
In the privileged mode, show the minimum security event interval by using the
following commands:
Ruijie# show security event interval
Show the minimum security event interval.
For example:
Ruijie# show security event interval
Event sending interval(Seconds):5
To Next Page
Loading...
