Configuration Guide ND Snooping Configuration
Configuration Steps
Enable IPv6 ND Snooping
Ruijie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#ipv6 nd snooping
Configure trust attribute of the interface
Ruijie(config)#interface fastethernet 0/1
Ruijie(config-if)#ipv6 nd snooping trust
Ruijie(config-if)#exit
Verification
Ruijie# show ipv6 nd snooping
Global switch: enabled
ND Snooping is disabled in following VLANs:
To Next Page
Loading...
